enjoygaq.blogg.se - Kpg 49d 4 20 skype

KPG 49D 4 20 SKYPE MANUALS
KPG 49D 4 20 SKYPE SERIAL
KPG 49D 4 20 SKYPE SOFTWARE

800X600 or higher resolution recommended.

KPG 49D 4 20 SKYPE SOFTWARE

APPLICABLE TRANSCEIVERS This programming software supports the following transceivers: Conventional Format TK-780 (Mobile VHF) TK-880 (Mobile UHF) TK-280 (Portable VHF) TK-380 (Portable UHF) Trunking Format TK-780 (Mobile VHF) TK-880 (Mobile UHF) TK-280 (Portable VHF) TK-380 (Portable UHF) TK-980 (Mobile 800MHz) TK-981 (Mobile 900MHz) TK-480 (Portable 800MHz) TK-481 (Portable 900MHz) HARDWARE/ SOFTWARE REQUIREMENTS: This software is designed for use on an IBM PC, PS/2 and compatible computers with 10 Mbytes hard disk space, 32 Mbytes RAM. You can also retrieve data from a transceiver to edit on the computer. (TK-980/981/480/481 does not have Conventional Format) Using this software, first enter programming data into the computer, and then transfer the data to a transceiver. TK-880-V2-Only - 302XXXXX 697B Corrects lock-up when GPS receiver sends a comma when set for $PRMC 201.97 KB resources Yahoo Group for.TK-880-V2-Only - 306XXXXX 541D Allows PTT after attempting PTT while receiving an LTR Fleetsync PTT ID 202.13 KB.TK-880-V2-Only - 310xxxxx 2523 Corrects cannot decode MSK PTT ID when product is first turned on 202.95 KB.Lockout on conventional data channels 203.56 KB TK-880-V2-Only - 410XXXXX 8C84 Corrects busy ch.TK-880-V2-Only - 411XXXXX E613 Corrects no mic PTT after TX via COM1 203.85 KB CURRENT.TK-880-V1-Only - E4B3 Use only in Version 1 Radios CURRENT.Kenwood programming software reference for the TK-880 Recommended Software: KPG-49D Version 4 For the European version of the K-880 you will instead use the KPG-60D DOS software with the same KPG-46 cable.The KPG-49D Version 2.(any number) and 3.(any number) are DOS based, while version 4.(any number) are Windows based and much easier to use. Re-align the radio for optimum performance on 70cm. It is said that most Kenwood 450-490 radios will go to about 442-443 mhz, but the VCO can easily be adjusted to go lower. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum. The TK-880 will program below 450 MHz, but the receive sensitivity is reduced.

KPG 49D 4 20 SKYPE SERIAL

The cable is serial on one end and RJ45 on the other.

The last released KPG-49D software runs under Windows. The KPG-49D software can program all radios in the TK-X80 series.

programming You need the KPG-49D programming software and an appropriate cable.

TK-880H is 10W on low power and 45W on high power.

TK-880 is 5W on low power and 25W on high power.

Wide or narrow bandwidth frequencies Of the various revisions the two main models:.

Max 250 channels capacity (conventional mode).

32 systems / 250 groups (trunked mode).

This is a business band radio that is possible to program for use on 70cm ham radio. This is an FCC Title 47 Part 90 certified transceiver.

KPG 49D 4 20 SKYPE MANUALS

Kenwood commercial software, user manuals, service manuals for download.